Product information

PoE-adaptive gigabit coax converter set for corporations

ECB-G01CX-HJP

PoE correspondence gigabit coax converter for corporations which setting of various apparatuses, high-speed transfer of high-resolution video just utilize existing coaxial cable of possible up to 1,100m to be connected at existing analog cameras, and can build Network.

PoE-adaptive gigabit coax converter set (ECB-G01CX-HJP) for corporations
  • Article number
  • Features
  • Specifications

Model number / lineup

Model number /JANCD Features Standard price Remarks
PoE-adaptive gigabit coax converter set (ECB-G01CX-HJP) for corporations ECB-G01CX-HJP
4953103288379
59,800 yen (tax-excluded)

Product photo (※ to enlarge the images, please click)

Features of product

PoE-adaptive gigabit coax converter set for corporations

Utilization PoE-adaptive gigabit coax converter sets coaxial cable for ethernet communication

We convert signal of ethernet flowing through LAN cable for coaxial cables and are converter set which enables ethernet communication using coaxial cable by converting for LAN cables again again. We just utilize coaxial cable in operation which we used with analog surveillance camera and can perform introduction of IP Network camera easily.

We utilize smooth, flexible shift existing coaxial cables from "analog camera" to "IP (Network) camera"

We realize smooth and flexible conversion from "analog camera" to "IP (Network) camera".
Not only data but also supplying power is enabled at Fixed Wireless Access point or Network camera by converting coaxial cable in operation into LAN cable, and inflecting.
In this way, new wiring and removal of existing coaxial cable become needless, and there is reduction effect of period for large construction cost.

It is before This product introduction

Example which utilized PoE

After the This product introduction (utilize existing coaxial cable)

Example which utilized PoE

Transmission range up to 1,100m with long distance transmission-adaptive coaxial cable of up to 1,100m

The building, factory, public facilities or parking lot can just utilize coaxial cable that it was provided equipment for analog camera setting at distance more than ethernet standards (up to 100m) at the time of Network camera setting.

It supports transmission range up to 1,100m with coaxial cable. (at the time of use of ※ coaxial cable 5C-FB)

※Transmission range varies according to kind and state, network environment of coaxial cable to use.

※This product assumes what is set up by indoor environment. Please do not use outdoors.

Coaxial cable maximum transmission range indication (at the time of use of coaxial cable 5C-FB)

Coaxial cable name, Specifications Maximum transmission range
PoE feeding when not in use
(or to slave unit
At the time of AC adapter connection)
PoE feeding possibility distance
(from master unit
At the time of PoE feeding)
5C-FB
Magnitude of attenuation (@100MHz): 6.4dB/100m
Conductor resistance: 20.99 Ω/km
Up to approximately 1,100m
(approximately 100Mbps)
Up to approximately 760m
(approximately 500Mbps)

Coaxial cable maximum transmission range indication (at the time of use of coaxial cable 3C-2V,5C-2V)

Coaxial cable name, Specifications Maximum transmission range
PoE feeding when not in use
(or to slave unit
At the time of AC adapter connection)
PoE feeding possibility distance
(from master unit
At the time of PoE feeding)
3C-2V
Magnitude of attenuation (@100MHz): 17.0dB/100m
Conductor resistance: 92.00 Ω/km
Up to approximately 420m
(approximately 100Mbps)
Up to approximately 170m
(approximately 500Mbps)
5C-2V
Magnitude of attenuation (@100MHz): 8.0dB/100m
Conductor resistance: 36.00 Ω/km
Up to approximately 900m
(approximately 100Mbps)
Up to approximately 440m
(approximately 500Mbps)

Indication of the available cable head

Transmission range maximum in PoE feeding mint condition Magnitude of attenuation (dB/100m) of maximum power dissipation (72dB) x 100/ pair elephant cable
Transmission range maximum from master at PoE feeding (760m x 20.99 Ω/km) conductor resistance (Ω/km) of ÷ object cable

It supports PoE feeding that can supply power to Network apparatus only with LAN cable

We cope with PoE feeding to Network apparatuses such as IP cameras in conformity with PoE(IEEE802.3af) and PoE+(IEEE802.3at) standard.

Slave unit receives electricity via coax from master unit and can work.

By camera PoE which connected with slave again can supply.

Only as for the master unit side at the time of AC adapter connection (only as for the This product)

・Can install only in This product; is constituted.

※When the use of high current of 802.3at and long-distance coaxial cable is necessary, it becomes available by having you connect AC adapter ECB-EX-AC54 sold separately to slave unit.

To master unit, both slave units at the time of AC adapter connection (AC adapter :ECB-EX-AC54 sold separately is necessary.)

・When PoE wants to feed in 802.3at

・When we want to feed in 802.3af coaxial cable is long (more than use of 5C-FB 760m)

※In the case of the above, it is necessary to have you purchase exclusive AC adapter (separate sale).

When you use this plane, please confirm the length of the coaxial cable.

Maximum distance of coaxial cable is as follows. (at the time of use of 5C-FB)

We have access to AC adapter to slave unit
Unavailable Available
PoE feeding to device which we connected to slave unit There is no PoE feeding Up to approximately 1,100m Up to approximately 1,100m
15.4W (802.3af) Up to approximately 760m Up to approximately 1,100m
30.0W (802.3at) (unusable) Up to approximately 1,100m

※AC adapter connection to master unit is required.

"Full HD," high resolution such as "4K", high speed communication by the correspondence giga port deployment to large-capacity video are possible

We are stronger in noise than UTP cable and utilize advantage of coaxial cable that long distance transmission is possible to the maximum and cope with high-speed gigabit communication. It becomes able to accommodate Network camera recording devices such as NVR(NetworkVideoRecorder) and management terminal and Network camera in high-speed gigabit.

※It is maximum in technical standard and does not show effectiveness speed.

Reference: Maximum communication possibility number (theoretical value) of Network camera

It is stable, and, depending on bit rate which transmission rate and camera of Network can transmit, camera number that can communicate changes. The following calculated from bit rate every resolution based on the biggest throughput that measured using 5C-FB cable of 200m; can communicate, and is number (theoretical value). We do not guarantee stable action when we connected listed number.

Resolution: Video compression Frame rate *1 Maximum bit rate *2 which camera can transmit Transfer
Protocol
Can communicate; number
(theoretical value)
2992*2992
(4K)
H.264 15fps 30.7Mbps UDP 20
1920*1080
(Full HD)
H.264 60fps 24.6Mbps UDP 26
1920*1080
(Full HD)
H.264 30fps 14.3Mbps UDP 44
1280*960
(QVGA)
H.264 30fps 9.2Mbps UDP 69
720 X 480
(D1)
H.264 30fps 4.5Mbps UDP 142

*1: : We inspect in maximum which we can set with camera which we used for the measurement.
*2: : Maximum bit rate varies according to Specifications of camera.

Reference: Throughput change by the length of the coaxial cable

Real transmission rate changes by kind, the length of the coaxial cable. Throughput decreases so that the length of the coaxial cable is long because damping grows big. It is speed that we measured using 5C-FB cable as follows. We do not guarantee that the same speed appears in real environment.

  The length of the coaxial cable
Kind of coaxial cable 100m 300m 400m 500m 760m 1000m 1100m
5C-FB * 650Mbps 630Mbps 620Mbps 600Mbps 500Mbps 280Mbps 100Mbps
Cable Specifications:
* Magnitude of attenuation (@100MHz): 6.4dB/100m, conductor resistance: 20.99 Ω/km

Throughput with cable is estimate based on 5C-FB cable actual value as follows.

The length of the coaxial cable
Kind of coaxial cable 170m 420m 900m
3C-2V (*1) 500Mbps 100Mbps -
5C-2V (*2) 600Mbps 500Mbps 100Mbps
Cable Specifications:
(*1) magnitude of attenuation (@100MHz): 17.0dB/100m, conductor resistance: 92.00 Ω/km
(*2) magnitude of attenuation (@100MHz): 8.0dB/100m, conductor resistance: 36.00 Ω/km

Reference: Bit rate indication of various Video compression standards

Resolution:
SD HD Full HD 4K
Video compression standard Main Uses 720 X 480 1280 X 720 1920 X 1080 3840 X 2160
H.264
(MPEG4-AVC)
YouTube 3Mbps 5Mbps 8Mbps 25Mbps
MPEG-2 Terrestrial digital, DVD 6Mbps 10Mbps 16Mbps 50Mbps
MPEG-1,
M-JPEG
Video CDs 12Mbps 20Mbps 32Mbps 100Mbps

※Mention bit rate is based on reference bit rate of "H.264" and is on desk reference level that we calculated based on compress percentage of target compression standard.

It may be different from real bit rate of viewdata in each standard.

The bit rate mentioned above becomes mean value, and bit rate more than 2-3 times of the mean may be necessary in real Video momentarily.

When we connect camera because viewdata may be lost by outbreak of packet loss when bit rate is short, network design recommends what is done to find band of 2-3 times of the bit rate of each camera mentioned above.

Bit rate detailed analysis image of video data (H264) of mean bit rate 8Mbps

Bit rate detailed analysis image

Simple connection setting to be usable just to connect is not necessary and can work

We connect master unit slave unit to both ends of coaxial cable in operation, and Network wires with LAN cable.
It is available just to switch on without performing special setting.

※We use IP address of "192.168. 3.251" for master unit slave units. (time of shipment set point)
When competition of IP address occurs in environment to use, please carry out change of IP address from setting window.

Setting Manual is this >>

Magnet which is convenient for Contents installation to support setting (fixation) of coaxial converter - unit, rubber foot attachment

"Rubber foot supporting setting (fixation) of coaxial converter - unit," "magnet" is attached as standard equipment.
In addition, we put hall for wall hangings on the unit body.
Let alone plane, wall surfaces are available for a variety of installation depending on use environment.

Heat resistance 50 degrees Celsius correspondence to provide stable possible motion in severe environment and the summertime to be

It is correspondence to operating temperature 50 degrees Celsius to provide stability possible motion at place that is easy to become severe environment in the summertime such as school or apartment. It is available without minding setting environment.
We clear immunity examination of "IEC61000-4" conformity. We realized high reliability and longer life appropriate for coaxial converter which operation was demanded from for 24 hours.

We give extension guarantee an extension guarantee guarantee by user's registration more for three years of feeling relieved for two years (sendobakku maintenance)

We guarantee for three years of relief for term of a guarantee (sendobakku maintenance).
Furthermore, we do extension guarantee (five years in total) of two years only in customer who had you register within three months after purchasing.

※ELECOM support & service company (ESSC) performs about extension guarantee offer for two years by user's registration.

We cope with maintenance service to support use of long-term apparatus

bnr_support_repair We prepare for delivery maintenance (last soup stock) and sendobakku maintenance (extension) with option to be able to use apparatus in peace in the long term.
You have a choice depending on needs of customer.

About maintenance service, it is this in detail

Delivery maintenance (optional service)

We send substitute plane to designation place of customer at the time of obstacle. Please send back apparatus with malfunction to us after the exchange in customers.

sendobakku extension maintenance (optional service)

Extension service of standard free term of a guarantee (three years). We have you send inoperative apparatus and send repair completion article or substitute plane to place of customer designation.

Exclusive AC adapter (separate sale) which width of inflection of PoE apparatus spreads through

Exclusive AC adapter (separate sale)

eresapo It is exclusive AC adapter that width of utilization of connection PoE apparatus opens by being connected to slave unit.
※PoE feeding is enabled on the following conditions.
・When PoE feeding in IEEE 802 .3at standard is necessary
・760m ※When PoE feeding in IEEE 802 .3af standard is necessary for distance more than 1
(distance that both cases can communicate becomes up to 1,100m ※ 1.)
※1 coaxial cable in the case of 5C-FB Specifications.
Exclusive AC adapter (separate sale) ECB-EX-AC54 is this >>

Specifications

The ethernet side Conformity standard IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802 .3x Flow Control, IEEE 802.3at/IEEE802.3af Power over Ethernet (only as for function / slave to receive)
Data transmission rate (value of standard) 10/100/1000Mbps
Communication method: Full duplex / HDX automatic reshuffling
LAN port 10/100/1000BASE-T (RJ-45 type 8 pole connector) x 1, automatic negotiation /Auto MDI/MDI-X correspondence ※The slave side supports PoE feeding
Communication distance Up to 100m
Accessible apparatus IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Supported Devices
PoE feeding electricity Up to 30.0W ※On the slave side at the time of AC adapter connection. Only the slave side can feed. / up to 15.4W ※Only on the master side at the time of AC adapter connection. Only the slave side can feed.
Correspondence PoE tray electric equipment device IEEE 802 .3af and IEEE 802 .3at-adaptive apparatus to receive ※Apparatus which only the slave side can feed slave unit at the time of AC adapter connection, and receives / IEEE 802 .3af correspondence ※Only the slave side can feed slave unit at the time of AC adapter non-connection
The coax side Conformity standard G.hn (coaxial cable)
Data transmission rate (value of standard) 1000Mbps ※1:
Communication method: HDX
LAN port BNC terminal (female)
Communication distance IEEE 802 .3af PoE feeding: Up to 760m (5C-FB ※ 2)/PoE feeding when not in use: Up to 1,100m (5C-FB ※ 2)
Transmission range (at the time of use of optional AC adapter) Up to 1,100m (5C-FB ※ 2, ※ 3, PoE power feeding are unused as for both IEEE 802 .3af and IEEE 802 .3at cases)
Frequency Range: 5-95MHz (G.hn standard 100MHz plan)
Modulation technique OFDM
Allowable loss Up to 72dB
Correspondence Impedance 50/75Ω
Accessible apparatus "ECB-G01CX-HJP" made in us ※Please use master unit and slave unit in on-to-one connection by facing by all means. Using distributor / turnout cannot be connected.
Data transfer system Store & forward
MAC address table 1K
Correspondence frame size 1,522Bytes (we include VLAN tag frame 4Bytes)
Support function BPDU/EAPOL frame transmission
Standard: EMI standard VCCI class A
Safe standard conformity IEC61000-4
LED LED PWR Lighting: Power activation
LAN Lighting: Link up, blinking: Under data transmission
COAX Lighting: Link up, blinking: Under data transmission
Power supply part Rated input power Voltage Rated input power Voltage AC100 - 240V ±10 (50/60Hz)
Power consumption (at the time of PoC/PoE non-use) Up to 4.0W (master): Up to 4.8W (slave)
Calorific value (at the time of PoC/PoE non-use) Up to 14.4kJ/h (master): Up to 17.3kJ/h (slave)
Power consumption (at the time of use of PoC/PoE) Up to 30.6W (master): Up to 39.2W (slave)
Calorific value (at the time of use of PoC/PoE) Up to 110.2kJ/h (master): Up to 141.2kJ/h (slave)
Environmental condition In operation, it is temperature 0-50 degrees Celsius
In operation, it is humidity 10-90% (thing without dew condensation)
Storage temperature -20-60 degrees Celsius
Storage humidity 5-90% (thing without dew condensation)
Dimensions: 75mm in width X 94.3mm in depth X 39mm in height (we remove protrusion)
Weight : Approximately 300 g (only as for the body / master-slave each)
Package contents The product body: Two (for each one master / slave), exclusive AC adapter "ECB-EX-AC54:" One, exclusive AC power cable (3 pins, approximately 1.8m): One, 3 pin -2 pin conversion adapters: One, rubber foot: Four, magnet: Four (screw set: four), Manual: One piece, serial Sticker: Two pieces
Option AC adapter for exclusive use of ECB-G01CX-HJP: ECB-EX-AC54
Term of a guarantee Three years
Others ※1: This number is value of standard and is affected by state, network environment of used coaxial cable. ※It is use coaxial cable 5C-FB reference level conductor resistance 20.99 Ω/km (@20 ℃), magnitude of attenuation 6.40dB/100m(100MHz) 2 in time of measurement ※Connection of AC adapter is necessary for slave unit.
Accessories: Exclusive AC adapter (ECB-EX-AC54): One, exclusive AC power cable (3 pins, approximately 1.8m): One, 3 pin -2 pin conversion adapters: One, quick setup guide (this newspaper): One piece, magnet (installation screw) set: Four sets, rubber foot: Eight, serial number Sticker: Two pieces,

※ Specifications may change without a notice, thank you for your understanding.

Each part name

  • ①LAN port
  • ②DC Jack
  • ③Reset button
  • ④Hall for wall hangings
  • ⑤PWR lamp (green)
  • ⑥LAN port lamp (green)
  • ⑦Coax lamp (green)
  • ⑧Coaxial connector

Accessories:

  • Exclusive AC adapter (ECB-EX-AC54): 1
  • Exclusive AC power cable (3 pins, approximately 1.8m): 1
  • 3 pin -2 pin conversion adapters: 1
  • Quick setup guide (this newspaper): One piece
  • Magnet (installation screw) set: Four sets
  • Rubber foot: Eight
  • Serial number Sticker: Two pieces